1.Material:Steel with zinc plating
2.Standard parts and electrical type
3.Usage: For Vacuum Circuit Breaker and switchgear
4.Standard: Chinese national standard – GB standard (equal to IEC standard)
1.In closing state, when handcart in working or isolated position, and with handle operating, the handcart won’t move, so that to prevent to pull handcart on- load.
2 .When handcart in working position, EK6 earthing switch can’t close, to avoid closing earthing switch.
3 .When handcart back to isolated state, after EK6 closing, the handcart can’t be moved to working position to prevent closing with earthing wire.
4.Once handcart is away from isolated position, when push the handcart with handle to working position, during the way, can’t carry on closing operation.While after reached to working position, closing operation can be made.
5.There are 2 auxiliary switches (code S8,S9) installed on handcart, contact’s rated current is 15A . S8 gets 5 pairs NC contact,to make signal of isolated position.When handcart is in isolated position, auxiliary switch S8 is in closing state, while in working position,S8 is in open state. S9 gets 5 pairs NO contact to make signal of working position.When handcart is in isolated position,S9 is in open state,while in working position,S9 is close state.
6.After handcart getting into cabinet, as long as handcart is not in isolated position, it can’t draw out from the cabinet.
Model |
A | B | C | D | E | F | G |
DPC-5-800 |
650 | 600 | 520 | 520 | 652 | 685 | 25 |
DPC-5A-800 |
|||||||
DPC-5-1000 |
850 |
800 | 720 | 700 | 852 | 885 |
45 |
DPC-5A-1000 |
1.Earthing bar installation diagram
2.Earthing bar installation diagram(Type 1000)
3.Earthing contact installation diagram
4.Earthing clip installation diagram
We're here to help! Connect with our team for expert support and personalized solutions.
Check out these related products you might also be interested in.
Get A QuotePower your projects with long-lasting switchgear and switchgear components from Liyond.