GIS Three-Position Incoming Switch Manual Mechanism

GIS three-position incoming switch manual mechanism compatible with ABB GIS switches and their proprietary switches. This mechanism features a unified shaft for both output and manual operations, delivering an output torque exceeding 80 N·m and an output angle of ±95 degrees, ensuring precise positioning in the OFF state.

Get A Quote

Electrical Products

Use Conditions
Technical Parameters

Use Conditions of GIS Three-Position Incoming Switch Manual Mechanism

1, The altitude does not exceed 2000m, earthquake intensity does not exceed 8 degree.

2, Ambient temperature is below 40 degree, above -30 degree. Daily average value of relative humidity is 95%, month average value is below 90%

3, Not suitable for places with frequent violent vibration, steam, gas,chemical corrosion, salt spray, dirt and dust, fire, explosion that could significantly effect the performance.

Technical Parameters of GIS Three-Position Incoming Switch Manual Mechanism

1. It can be equipped with ABB GIS three-position incoming switch and our company’s three-position incoming switch.

2. Output and manual operation is in one shaft,output torque is greater than 80N.m. Output angle ± 95 degree, the OFF position is accurate positioning.