Embedded pole cylinder 40.5kV EEP-40.5/2500-31.5 EEP-40.5/2000-31.5
Model No: EEP-40.5/2500-31.5 EEP-40.5/2000-31.5
Embedded pole cylinder with epoxy resin,is made by casting vacuum interrupters,main circuit conduct and mounting parts with epoxy into an integral part. The vacuum interrupters, however,should be enveloped well with a slight fold of silicon rubber jacket before that process.
Parameters of Embedded pole cylinder
MAIN TECHNICAL SPECIFICATION UNIT SPECIFICATION 2500 2000 Rated voltage kV 40.5 Rated current A 2500 2000 Rated frequency Hz 50/60 Short-duration（1min） power frequency withstand voltage kV 95 Lightning impulse withstand voltage kV 185 Rated short-circuit breaking current kA 31.5 Rated peak withstand current kA 80 Rated short-circuit making current kA 80 Rated short-time withstand current kA 31.5 Rated duration of short-circuit S 4 Rated breaking current of single capacitor bank A 400 Rated breaking current of back to back capacitor bank A 400 Rated operating sequence o-0.3S-co180S-co Breaking operations of rated short circuit breaking current Time 20 Mechanical endurance Time 10000 Contact self-close force N 120±50 Force required to hold contacts open at full stroke N 240±50 Circuit resistance at lower limit of rated contact force ≤ 30 Contact limit erosion mm 3 Gas pressure inside vacuum interrupter Pa ≤ 1X10-3 Partial discharge Pc ≤ 5 Weight of moving parts Kg Weight of vacuum interrupter embedded poles Kg
Mechanical data required for the matched vacuum switchgear
MAIN TECHNICAL SPECIFICATION UNIT SPECIFICATION 2500 2000 Clearance between open contacts mm 18±1 Average opening speed m/s 1.55±0.15 Average closing speed m/s 0.7±0.2 Rated contact pressure N 3200±200 Contact bouncing duration at closing operation ms ≤ 3 Out of simultaneity of contact closing and opening ms ≤ 2 Bouncing back amplitude of opening contact mm ≤ 3
Information for Embedded pole cylinder
From the development of insulations on breakers,it can be divided into three generations:air, composite and solid insulation and so-called solid insulation means Embedded pole cylinder,which might represent the great advancement of insulation on vacuum breakers.Since the epoxy can be used to replace the insulating and mechanical supports,the breakers therefore become compact and simple and are able to service under humid and dusty conditions.When the external insulations of miniature chambers in air condition fail to fulfill the requests of specifications,Embedded pole cylinder are therefore introduced and now become one of the most applicable ways in the field of medium voltage breakers either at home or abroad.
Embedded pole cylinder 24kV EEP-40.5/2500-31.5 EEP-40.5/2000-31.5
We are specialty on Embedded pole cylinder of medium voltage and high voltage components, such as 12KV, 24 KV, 36KV and 40.5KV switchgear bushing, contactor box, insulators, transducers. 630A, 1250A, 2500A, 3150A and 4000A contactor box, club contact, fix contact, arm contact and jaw contact. 630A and 1250A VS1 circuit breaker. 630A and 1250A ZN85-40.5 circuit breaker. 12KV and 24KV earth switch. KYN28A-12 and KYN61 high voltage switchgear components.
- [Download not found]
If you would like a quotation or further information on this product, please fill in the form below and we will reply to you within 1 working day.