Interlock Mechanism Shutter Mechanism For Switchgear 5XS.320.010

Shutter mechanism for switchgear 5XS.320.010

• Specification
• Drawing
• Application
• PDF Download

• Interlock Mechanism Shutter Mechanism For Switchgear 5XS.320.010

  The shutter mechanism is an important part of high-voltage distribution switchgear. At present, the shutter mechanism of domestic production mainly adopts the spring mechanism to operate the upper and lower movable doors. When the movable part is pushed forward so that the movable contact is drawn into the static contact, the spring linkage mechanism of the valve is driven by the linkage as the movable part hits the valve, and under the action of external force, the upper and lower valve plates move up and down respectively and open, so that the valve forms a synchronous counter-opening structure; conversely, when the movable part is pulled out, under the action of the spring, the linkage drives the valve plate to reset and cover the static contact completely.

  Specifications

  • Type:5*S.320.010
  • Material: iron and surface zincing
  • Direction:offside
  • High voltage switchgear accessories

  Description

  • Application: Used in the switchgear, the width of the switch can be 800mm or 1000mm.
  • The rated voltage with 12kV, 24kV etc.
  • The installation drawing with the valve mechanism. It is two types on it, please have attention.
  • If it is not clear enough, contact for details.It will be convenient for this.

   

   

• Shutter mechanism for switchgear 5XS.320.010

  

  No.	Item	Code	Qty
  1	Right support	8XS.123.011	1
  2	Right linking plate	5XS.235.011	1
  3	Sign	8XS.866.014	1
  4	Left linking plate	5XS.235.010	1
  5	WasherΦ6	GB97.1-85	16
  6	Elastic washerΦ6	GB93-87	10
  7	Bolt M6*12	GB5783-86	10
  8	Left support	8XS.123.010	1
  9	Linking plate welding	5XS.174.016.1（for VD4）	2
  		5XS.174.016.2（for VS1）
  		5XS.174.016.3 （for VB2）
  10	Down shutter	8XS.320.010（800mm）	1
  		8XS.320.010.1（650mm）
  		8XS.320.010.2（840mm）
  		8XS.320.010.3（900mm）
  		8XS.320.010.4（1000mm）
  11	Block card	DK-8	8
  12	Support plate	8XS.123.013	3
  13	Linking plate welding	5XS.174.015.1 （for VD4）	2
  		5XS.174.015.2 （for VS1）
  		5XS.174.015.3 （for VB2）
  14	Sign	8XS.866.012	1
  15	Sign	8XS.866.013	2
  16	Support plate	8XS.123.012	3
  17	Nut M6	GB6170-86	6
  18	Upper shutter	8XS.320.011（800mm）	1
  		8XS.320.011.1（650mm）
  		8XS.320.011.2（840mm）
  		8XS.320.011.3（900mm）
  		8XS.320.011.4（1000mm）
  19	Guide rod	8XS.234.011（for VD4.VS1）	2
  		8XS.234.011.1（for VB2）
  20	Stop collar	8XS.210.011	2

• 

• Shutter mechanism for switchgear 5XS.320.010

  [Download not found]

Interlock mechanism 5XS.239.010 for switchgear

Interlock mechanism 5XS.239.010 for switchgear

• Specification
• Drawing
• PDF Download

• Interlock mechanism 5XS.239.010 for switchgear

  Specifications

  • 1.Type:5XS.239.010
  • 2.Usage:Auxiliary parts of switchgear
  • 3.OEM orders are welcome
  • 4.Produce according to your need
  • 5.Quality guarantee

  Specification:

  • 1.Changing mechanism by our factory after the improvement, it can satisfy the back door in not good under the condition of  not  separating brake the grounding switch, handcart cannot enter working position.
  • 2.It must  in order to close  down door,later separating the grounding switch, handcart can into working position from the test   position in order to guarantee life safety
  • 3.Suface zincing is antioxidation and durable and without impurities

  Characteristic :
  This interlock switchgear mechanism after improved,handcart can not enter the working position and unable to make earthing switch break-brake when the down door unlocked.You must firstly shut the door and make the earthing switch break-brake ,then the handcart go into the work position from the test position to ensure personal safety .

  With coordination of other interlocking mechanism, it can provide electrical assemblies switchgear equipment with safe effective and all round “five-protection” interlocking solvable plan.

• Interlock mechanism 5XS.239.010 for switchgear

  

  Drawing-1

  

  Drawing-2

  
  

  No.	Item	Code	Qty
  1	Pin shaft welding	5XS.234.013	1
  2	Pressure spring	8XS.282.021	1
  3	Pin φ3*20	GB79-86	2
  4	Support	8XS.043.020	1
  5	Screw M5*12	GB70-85	1
  6	Cap	8XS.017.010	1
  7	Support assembly	5XS.043.021	1
  8	Tongue	8XS.060.012	1
  9	Screw M6*20	GB70-85	3
  10	Washer φ6	GB93-87	5
  11	Washer φ6	GB97.1-85	7
  12	Pin	8XS.200.015	1
  13	Handle	5XS.253.010	1
  14	Base plate	8XS.156.011	1
  15	Bending plate	8XS.161.055	1
  16	Pin	8XS.933.051	2
  17	Screw M6*20	GB5783-85	2
  18	Nut M6	GB6170-86	2

• Interlock mechanism 5XS.239.010 for switchgear

  [Download not found]