FK10-II-33 Electric Pilot Contact 3NO3NC For HV Electrical Switch

• Specification
• Drawing

• FK10-II-33 Electric Pilot Contact 3NO3NC For HV Electrical Switch

  Item No: FK10-II-33

  Application:

  FK10 series aux switch applies to the HV operating mechanisms switching on, switching off, interlock, and controlling of signal circuit. It also applies to HV switchgears, and can be used as transfer switch or cubicle switch.

  Technical Parameter:

  1.Electrical Load: AC 80V, 6A; AC 220V, 10A; AC 240V, 6A; AC 415V, 4A; AC 500V, 3A; AC 660V, 2A.
  2.Rated working voltage: AC 660V
  3.Rated working current: 0.4A
  4.Rated isolation voltage: 690V
  5.Rated frequency: 50 Hz
  6.Rated Current: 15 A

  Working Conditions:

  1. Ambient temperature: not higher than +40 °C, not less than -40°C
  2. Altitude: not exceed 2000m.
  3. Relative humidity: daily average of not more than 95%, month average of not more than 90%. Saturated vapor pressure daily average of not more than 2.2 × 103MPa, month average not more than 1.8 × 103MPa.
  4.The acceleration is not greater than 15m/ square seconds;
  5.The air is not significantly affected by dust, smoke, corrosive and flammable gas, steam or salt fog contamination.

• FK10-II-33 Electric Pilot Contact 3NO3NC For HV Electrical Switch

  Item No: FK10-II-33

  

  Operative parameter:

  Actuating Force	Contact pressure (NC contact)	Actuating length	Electrode  travel	Constriction resistance	Delay length
  ≤16N	0.55 N	4mm	3 mm	50 mΩ	0.3 mm