FK10-II-50 Auxiliary Switch Manufacturer Electric Switch For Vacuum Switch

• Specification
• Drawing

• FK10-II-50 Auxiliary Switch Manufacturer Electric Switch For Vacuum Switch

  Item No: FK10-II-50

  Main application:

  FK10 series applies to the HV operating mechanisms switching on, switching off, interlock, and controlling of signal circuit. It also applies to HV switchgears, and can be used as transfer switch or cubicle switch.

  Working Conditions:

  1. Ambient temperature: not higher than +40 °C, not less than -40°C
  2. Altitude: not exceed 2000m.
  3. Relative humidity: daily average of not more than 95%, month average of not more than 90%. Saturated vapor pressure daily average of not more than 2.2 × 103MPa, month average not more than 1.8 × 103MPa.
  4.The acceleration is not greater than 15m/ square seconds;
  5.The air is not significantly affected by dust, smoke, corrosive and flammable gas, steam or salt fog contamination.

  Structure:

  1 According to different requirements, the turning angle of series F10 could be 60°~90°~120°.
  2 Series F10 is divided into straight type and horizontal type according to the assembling method. It’s divided into horizontal structure and straight delay contact according to the way of construction.

• FK10-II-50 Auxiliary Switch Manufacturer Electric Switch For Vacuum Switch

  Item No: FK10-II-50

  

  Electric switch for vacuum circuit breaker FK10-II-50

  
  

   

  About us:
  We are specialty on epoxy resin medium voltage and HV components, such as 12KV, 24 KV, 36KV and 40.5KV switchgear TG3 wall bushing, contactor box, insulators, transducers. 630A, 1250A, 2500A, 3150A and 4000A contactor box, club contact, fix contact, arm contact and jaw contact. 630A and 1250A VS1 circuit breaker. 630A and 1250A ZN85-40.5 circuit breaker. 12KV and 24KV earth switch. KYN28A-12 and KYN61 high voltage switchgear components!
  We will give you best quality and price!