F10-16 8NC8NO AUX Switches Auxiliary Switch For VCB

F10-16 8NC8NO AUX Switches Auxiliary Switch For VCB

• Specification
• Drawing

• F10-16 8NC8NO AUX Switches Auxiliary Switch For VCB

  Item No: F10-16 

  F10 series auxiliary switch is widely used in various high-voltage circuit breakers, high-voltage disconnecting switch operator control circuit in the division and closing signal control, interlocking protection, mainly applied to vacuum switches, CT series and other spring-operated mechanism, disconnecting switches and other electrical equipment, also can be used as a changeover switch, combination switch.

   

  Structure and Features
  1. The self-operated plane sliding contact is adopted, and the moving contact is composed of two contact pieces without fixed gap, which can make the contact pressure of each pair of contacts consistent.
  2. It adopts a laminated structure, and the number of contacts can be increased or decreased as required.
  3. Small size, simple structure, flexible operation, safe and reliable.

  Working Conditions

  1. Ambient Temperature (-40℃≤ t ≤40℃)

  2. Height above Sea Level (h≤3000m)

  3. Monthly mean relative air humidity ≤ 90%, daily mean relative air humidity ≤ 95%

  4. Oscillatory acceleration 15m/s²

  5. Situation of no sharp pounding, no explosion risk, no inductive dust, no air destroying, insulators or corroding metal, and so on.

   

• F10-16 Auxiliary Switch for VCB

  Item No: F10-16 

  

  Drawing

  

  Data

  
  

  Note

  1. According to different requirements, the turning angle of series F10 could be 60°~90°~120°.

  2. Auxiliary Switch Series F10 is divided into straight type and horizontal type according to the assembling method. It’s divided into horizontal structure and straight delay contact according to the way of construction.

   

  Our Advantages

  1. We are specialized in sales of high-voltage electrical insulation products: contact box, bending plate, insulator, sensor, wall bushing, contact arm bushing, insulated cylinder and tube.
  2. Strict quality control and excellent after-sales service.
  3. Experienced staffs answer all of your question in fluent English.
  3. Customized design is available. OME&ODM are welcomed.
  4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staffs.

   

FK10-I-33 Hot product auxiliary contact

FK10-I-33 Hot product auxiliary contact

FK10-I-32 Distribution Electrical Auxiliary Contact 3NO 2NC For Vacuum Contactor

• Specification
• Drawing

• FK10-I-32 Distribution Electrical Auxiliary Contact 3NO 2NC For Vacuum Contactor

  Item No: FK10-I-32

  Application:

  FK10 series applies to the HV operating mechanisms switching on, switching off, interlock, and controlling of signal circuit. It also applies to HV switchgears, and can be used as transfer switch or cubicle switch.

  Technical Parameter:

  1.Electrical Load: AC 80V, 6A; AC 220V, 10A; AC 240V, 6A; AC 415V, 4A; AC 500V, 3A; AC 660V, 2A.
  2.Rated working voltage: AC 660V
  3.Rated working current: 0.4A
  4.Rated isolation voltage: 690V
  5.Rated frequency: 50 Hz
  6.Rated Current: 15 A

  Working Conditions:

  1. Ambient temperature: not higher than +40 °C, not less than -40°C
  2. Altitude: not exceed 2000m.
  3. Relative humidity: daily average of not more than 95%, month average of not more than 90%. Saturated vapor pressure daily average of not more than 2.2 × 103MPa, month average not more than 1.8 × 103MPa.
  4.The acceleration is not greater than 15m/ square seconds;
  5.The air is not significantly affected by dust, smoke, corrosive and flammable gas, steam or salt fog contamination.

• FK10-I-32 Distribution Electrical Auxiliary Contact 3NO 2NC For Vacuum Contactor

  Item No: FK10-I-32

  

  Auxiliary contact for VCB FK10-I-32

  
  

  Operative parameter:

  Actuating Force	Contact pressure (NC contact)	Actuating length	Electrode  travel	Constriction resistance	Delay length
  ≤16N	0.55 N	4mm	3 mm	50 mΩ	0.3 mm